Covermate 3 Spa Cover Lifter
List Price: $399.99
You save $120.04 (30%)
With the assistance of gas shocks, this durable cover lifter will take the heavy lifting out of opening your spa cover. In addition, the Covermate 3 design requires only 4-6" of clearance, making it ideal for gazebos or other tight spaces. Fits most spas up to 96" wide and arrives 80% assembled. Two mounting options allow you to mount the lifter directly to the cabinet of your spa or to mount it to your deck.
Average Customer Review: Not yet rated
Write an online review and share your thoughts with our SPA-MART community.There are no reviews
Brand: Leisure Concepts
Mfr Part Number: CMIII-PLAST
Warranty: 1 Year
Construction Material:
Aluminum
UP
Rear Clearance Needed: Less than 12 inches
Gas Shock Assisted: YES
Slide Under Spa Mounting:
NO
Works with Round Spas: NO
Works with Octagon Spas: NO
Works with Raised Speaker Spas:
YES
Works with Radius Corners over 13 inches:
NO
Deckmount Compatible: NO
Customers who have purchased Covermate 3 Spa Cover Lifter have also purchased the following:
Q: How much clearance is needed on each side for this lift cover?
A: A minimum of 5 inches of side clearance is required for the operation of the Covermate 3.
Q: Will the lifter work with the heavy covers also? Also under the additional info you have this listed :Deckmount Compatible: NO but under description this is listed:Two mounting options allow you to mount the lifter directly to the cabinet of your spa or to mount it to your deck. - Which is it?
A: Yes they will lift heavy covers. They can also mount to the deck as well.
Q: I have an Arctic spa with a "Cast Core" cover. It weighs about 40-50 pounds. Will this cover lift work?
A: As long as your cover has a hinge connecting the two halves, this lifter will work for you. 50 lbs can easily be handled by this unit.
Q: What side is the lock bar located on and is it possible to move it to the other side?
A: It is located on the left side of the lifter. The only way to move it from a corner, is to move the lifter to the opposite side. That would make the lock bar in the opposite corner located on the tub.
Q: Does the Covermate 3 work with a Hotspring Jetsetter from 2001?
A: Unfortunately, no. The Covermate 3 requires a minimum of 72 inches in length and width. The Jetsetter is approximately 62 inches wide. The Cover Valet with it's two independent arms will prove as a suitable alternative.
Q: Does the cover mate III come in grey?
A: Unfortunately, no it does not.
Q: Can the straps remain locked on the fold side if it is installed correctly?
A: To use the Covermate 3 cover lifter, the spa cover straps will need to be unlatched.
Recently Viewed
Products
SPA-MART Blog
spamart on Twitter
spamart on Facebook
AmericasSpaMart on YouTube
spamartdotcom on Pinterest
