ecoONE SPA basic water care kit instructions

1) Remove and clean cartridge filter with ecoone FILTER cleanser.

2) If necessary, use existing water to deep-cleanse your spa for 1 to 24 hours using approximately 4oz. (113g) of ecoone PIPE cleanser.

BIGUANIDE NOTE: When switching from a biguanide product, drain and refill spa before cleansing and replace cartridge filter.

NEW SPAS: New spas should be filled and cleansed before starting ecoone® as manufacturer 'wet testing' may cause buildup of mold, or other contaminants.

3) Drain spa and rinse surfaces with fresh water. Clean spa shell and cover. (we recommend ecoone® Shell and Liner Cleaner) Refill and drain spa 'well' (center of spa) 2 to 3 times to assure removal of all contaminants from plumbing.

NOTE: NEVER use household cleaners to clean your spa. They can damage the shell and cause foaming.

4) Refill spa and heat to operating temperature. Adjust pH, alkalinity, calcium hardness ONLY if necessary.

pH Range: 7.2 – 8.2
Alkalinity: 80 - 120
Hardness: 200+

VERY HARD or WELL WATER: Many initial water quality issues can be solved by filling your spa using the ecoone® Spa Pre-Filter. If your water is excessively hard, you may need to use a stain and scale control product.

5) Add minimum recommended amount of sanitizer or one dissolving packet of ONEShockTM(where available) per 250 gallons (950 liters)
(see “SANITIZERS” page: 5)

6) With jets and blowers running, add full bottle of ecoone® SPA monthly to spa.

MAINTENANCE:
         AS NEEDED: Maintain lowest recommended sanitizer level
                     (.5 to 3 ppm generally – follow sanitizer instructions)
                    DAILY: (or as needed) Shock spa with ONEShockTM, dichlor or  
                                 non-chlorine shock.
                 WEEKLY: Clean Cartridge Filter with ecoone FILTER cleanser
             MONTHLY: Add ecoone® SPA Monthly
EVERY 3 MONTHS: (or as needed) Cleanse spa with ecoone PIPE cleanser,
                               drain and refill.